1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
Guaranteed Safe Checkout

Top Highlights:
- Wireless 2.4GHz Independent Transmission for Easy Setup and Convenience.
- Compatible with Most Servo Gimbals.
- One-Click Reset with Fail-Safe Protection for Added Security.
- Universal Compatibility with RC Models - Land, Sea, and Air Ready.
Description:
Meet SyncPilot - the slick head tracking system built by FMS and XF Robot for mid-to-close-range FPV action. It runs on its own dedicated 2.4G connection (no messy signal forwarding required), so you get plug-and-play simplicity for your FPV gear.
The system delivers universal compatibility with virtually all RC platforms - from multirotors and fixed-wing aircraft to surface vehicles. Under optimal conditions, it can achieve 1km ground operational range and 2km+ airborne range, making it the ideal solution for most mid-to-close-range FPV scenarios. Install the SyncPilot on your model and dive into head-tracking technology!
Q&A:
1. What is a Headtracker?
A Headtracker is a motion-based control system that translates head movements into real-time control signals. When mounted on FPV goggles, it wirelessly transmits these signals to the gimbal, which adjusts the camera"s orientation, delivering a seamless and immersive FPV experience with responsive, real-time control.
2. What other equipment is needed to use the SyncPilot Headtracker Set?
You'll need a gimbal, camera, video transmission system, and compatible FPV goggles for mounting the SyncPilot Headtracker Set.
3. Are there any other accessories available to complement the SyncPilot Headtracker?
Yes! We offer several accessories to enhance your FPV experience, including the VTX Mount & Cooling Fan, FPV Servo Gimbal, and FPV Cockpits for the FMS RC Airplanes, including the 1100mm PC-21 and 80mm Hawk.
4. If the gimbal moves in the opposite direction of my head?
Make sure the head tracking module is installed correctly. You can also use the head tracker software to adjust the direction and gain settings to match your preferred setup.
5. How is the head tracking module powered?
The head tracking module runs on an independent battery that is charged via a Type-C port for up to 2 hours of use.
6. How is the head tracking receiver powered?
The head tracking receiver requires 5V power, which can be supplied through a direct connection to UBEC, the RC receiver, or the flight controller for quick and easy setup.
Specification:
Brand | FMS |
Model | SyncPilot Headtracker Set |
Headtracker Module Size | 45*28.2*4.2mm |
Receiver Size | 38*22*15mm |
Transmitter Size | 40*21*11.5mm |
Gross Weight | 80g |
Package Size | 135*90*55mm |
Assembly Time | 5min |
Headtracker Module Battery | 3.7V 300mAh |
Operating Time on Full Charge | 2h |
Operating Frequency | 2.4Ghz |
Singal Range (Optimal Condition) | Surface 1km; Airborne 2km+ |
Antenna | IPEX Omnidirectional T-type Antenna | Max. Gain 3dBi |
Casing Material | ABS Plastic |
Item | Note |
SyncPilot Headtracker Set | Includes transmitter & receiver |
SyncPilot Headtracker Receiver | Includes receiver only |
FPV Servo Gimbal (2-Axis) | 1. 3D Printed with ABS |
VTX Mount & Cooling fan (O4 Pro) | 1. 3D Printed with TPU |
VTX Mount & Cooling fan (03) | 1. 3D Printed with TPU |
VTX Mount & Cooling fan (Avatar) | 1. 3D Printed with TPU |
1100mm PC-21 FPV Cockpit | Used with FMS 1100mm PC-21 RC Airplane |
80mm Hawk FPV Cockpit | Used with FMS 80mm Hawk RC Airplane |
Manual And Support:
Manual - SyncPilot Headtracker Set
3D Printing - FPV Servo Gimbal
Package Included:
SyncPilot Headtracker Set Included:
1 x Headtracking Module
1 x Headtracking Transmitter
1 x SyncPilot Headtracking Receiver
1 x 5V Power Cable
1 x 3M Dual Locku2122
1 x Product Manual
1 x SyncPilot Headtracker Receiver
1 x 3D Printed with ABS
1 x 280° 9g digital servo
VTX Mount & Cooling fan (O4 Pro) Included:
1x 3D Printed with TPU
VTX Mount & Cooling fan ( 03) Included:
1x 3D Printed with TPU
VTX Mount & Cooling fan (Avatar) Included:
1x 3D Printed with TPU
1100mm PC-21 FPV Cockpit Included:
1x Cockpit
1 x 80mm Hawk FPV Cockpit Included:
1x Cockpit
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">

A part of the review has been auto-translated.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
A part of the QA has been auto-translated.